WINDOW GLASS TYPES USED IN BUILDING CONSTRUCTION BASICS AND TUTORIALS

WINDOW GLASS TYPES USED IN BUILDING CONSTRUCTION BASIC INFORMATION
What Are The Type Of Glass Used In Civil Construction?


Clear Window Glass.
This is the most extensively used type for windows in all classes of buildings. A range of grades, as established by Federal Government Standard DD-G-451c, classifies quality according to defects.

The more commonly used grades are A and B. A is used for the better class of buildings where appearance is important, and B is used for industrial buildings, some low-cost residences, basements, etc.

With respect to thickness, clear window glass is classified as ‘‘single-strength’’ about 3⁄32 in thick; ‘‘double-strength,’’ about 1⁄8 in thick; and ‘‘heavy-sheet,’’ up to 7⁄32 in thick.

Maximum sizes are as follows: single-strength, 40 50 in; doublestrength, 60 80 in; and heavy sheet, 76 120 in. Because of flexibility, single strength and double strength should never be used in areas exceeding 12 ft2, and for appearance’s sake areas should not exceed 7 ft2.

Plate and Float Glass. 
These have, in general, the same performance characteristics. They are of superior quality, more expensive, and have better appearance, with no distortion of vision at any angle.

Showcase windows, picture windows, and exposed windows in offices and commercial buildings are usually glazed with polished plate or float glass. Thicknesses range from 1⁄8 to 7⁄8 in. There are two standard qualities, silvering and glazing, the latter being employed for quality glazing.

Processed Glass and Rolled Figured Sheet.
These are general classifications of obscure glass. There are many patterns and varying characteristics. Some provide true obscurity with a uniform diffusion and pleasing appearance, while others may give a maximum transmission of light or a smoother surface for greater cleanliness. The more popular types include a clear, polished surface on one side with a pattern for obscurity on the other side.

Obscure Wired Glass.
This usually is specified for its fire-retarding properties, although it is also used in doors or windows where breakage is a problem. It should not be used in pieces over 720 in2 in area (check local building code).


Polished Wired Glass.
More expensive than obscure wired glass, polished wired glass is used where clear vision is desired, such as in school or institutional doors. There are also many special glasses for specific purposes:

Heat-Absorbing Glass.
This reduces heat, glare, and a large percentage of ultraviolet rays, which bleach colored fabrics. It often is used for comfort and reduction of air-conditioning loads where large areas of glass have a severe sun exposure.

Because of differential temperature stresses and expansion induced by heat absorption under severe sun exposure, special attention should be given to edge conditions. Glass having clean-cut edges is particularly desirable, because these affect the edge strength, which, in turn must resist the central-area expansion. A resilient glazing material should be used.

Corrugated Glass, Wired Glass, and Plastic Panels. These are used for decorative treatments, diffusing light, or as translucent structural panels with color.

Laminated Glass. 
This consists of two or more layers of glass laminated together by one or more coatings or a transparent plastic. This construction adds strength.

Some types of laminated glass also provide a degree of security, sound isolation, heat absorption, and glare reduction. Where color and privacy are desired, fadeproof opaque colors can be included.

When fractured, a laminated glass tends to adhere to the inner layer of plastic and, therefore, shatters into small splinters, thus minimizing the hazard of flying glass.

Bullet-Resisting Glass.
This is made of three or more layers of plate glass laminated under heat and pressure. Thicknesses of this glass vary from 3⁄4 to 3 in. The more common thicknesses are 13⁄16 in, to resist medium-powered small arms: 11⁄2 in, to resist high-powered small arms; and 2 in, to resist rifles and submachine guns. (Underwriters Laboratories lists materials having the required properties for various degrees of protection.) Greater thicknesses are used for protection against armorpiercing projectiles.

Uses of bullet-resisting glass include cashier windows, bank teller cages, toll-bridge booths, peepholes, and many industrial and military applications. Transparent plastics also are used as bullet-resistant materials, and some of these materials have been tested by the Underwriters Laboratories. Thicknesses of 11⁄4 in or more have met UL standards for resisting medium-powered small arms.

Tempered Glass.
This is produced by a process of reheating and sudden cooling that greatly increases strength. All cutting and fabricating must be done before tempering. Doors of 1⁄2- and 3⁄4-in-thick tempered glass are commonly used for commercial building.

Other uses, with thicknesses from 1⁄8 to 7⁄8 in, include backboards for basketball, showcases, balustrades, sterilizing ovens, and windows, doors, and mirrors in institutions. Although tempered glass is 41⁄2 to 5 times as strong as annealed glass of the same thickness, it is breakable, and when broken, disrupts into innumerable small fragments of more or less cubical shape.

Tinted and Coated Glasses.
These are available in several types and for varieduses. As well as decor, these uses can provide for light and heat reflection, lower light transmission, greater safety, sound reduction, reduced glare, and increased privacy.


Transparent Mirror Glass.
This appears as a mirror when viewed from a brightly lighted side, and is transparent to a viewer on the darker opposite side. This oneway- vision glass is available as a laminate, plate or float, tinted, and in tempered quality.

Plastic Window Glazing. 
Made of such plastics as acrylic or polycarbonate, plastic glazing is used for urban school buildings and in areas where high vandalism might be anticipated. These plastics have substantially higher impact strength than glass or tempered glass.

Allowance should be made in the framing and installation for expansion and contraction of plastics, which may be about 8 times as much as that of glass. Note also that the modulus of elasticity (stiffness) of plastics is about one-twentieth that of glass.

Standard sash, however, usually will accommodate the additional thickness of plastic and have sufficient rabbet depth.

Suspended Glazing.
This utilizes metal clamps bonded to tempered plate glass at the top edge, with vertical glass supports at right angles for resistance to wind pressur. These vertical supports, called stabilizers, have their exposed edges polished.

The joints between the large plates and the stabilizers are sealed with a bonding cement. The bottom edge or sill is held in position by a metal channel, and sealed with resilient waterproofing. Suspended glazing offers much greater latitude in use of glass and virtually eliminates visual barriers.

Safety Glazing. 
A governmental specification Z-97, adopted by many states, requires entrance-way doors and appurtenances glazed with tempered, laminated, or plastic material.


Related post



2 comments:

Estevan Rigoberto said...

There are different types of glass patterns, for the manufacture of special and technical glass, lead oxide, potash, zinc oxide, and other metal oxides are added. There are lots of essential choices to get created in choosing the right producer in your Glass and Mirror merchandise.
Glass Manufacturers

San Mah said...

These image would not look that good, if the designer did not use integral blinds there.

Post a Comment

PREVIOUS ARTICLES